Axiom Too CNC CMM (Mark 2) with Honeycomb Aluminum and Granite Table

Axiom Too CNC CMM (Mark 2) with Honeycomb Aluminum and Granite Table
(X) 640 x (Y) 600m x (Z) 500mm
$51,467.87
SKU: AX2-6-C-HG-PCM
|

Details

Axiom Too CNC CMM - (X) 640mm x (Y) 600mm x (Z) 500mm with Honeycomb Aluminum and Granite Table

The complete inspection system.

Fast, accurate and reliable, the Axiom Too CMM comes in four different sizes with Y axis travel up to 1500mm. Available as either a manual machine or with full CNC control, the Axiom Too can be used with touch trigger probe, or continuous contact scanning probe.

The all aluminum bridge structure not only ensures that the Axiom Too has low inertia and hence high acceleration to get the job done quickly, but also that the temperature of the machine rapidly follows the temperature of the room, ideal when the CMM is not housed in a controlled environment. Temperature compensation in the software reports results as if they had been measured at 20°C/68°F.

The standard high-tech granite and aluminum table, originally developed for the laser optics industry, provides fantastic natural damping of high frequency vibration and the granite Y rail allows pre-loading of the bridge air bearings in both directions for superior accuracy.

Another unique feature of the Axiom Too is that manual machines can be easily upgraded to CNC in the future, which allows the machine to adapt as your needs grow.

Key Features
• Shortest learning curve of any equivalent system
• Smallest overall footprint of any comparable size CMM
• Choice of Y axis sizes ranging from 600mm to 1500mm
• Suitable for the workshop environment
• Protection from environmental vibrations as standard
• Optimized friction free air bearings, aluminum bridge and granite table

Machines Options:
• Auto Temperature Compensation
• Touch Screen Joystick
• CCD Camera System
• Collimated Back Light Option
• Dual Monitor
• Fixture Kit

Common Probe Options:
• RTP20
• PH10T (w/TP20, TP200)
• PH10M (w/SP25)
• PH6M (w/SP25)

*Image shown for representational purposes only

Specs

Technical Specifications
Measuring VolumeX - 25.2"/640mm
Y - 23.6"/600mm
Z - 19.6"/500mm
Overall Size
(without monitor)
X - 44.4"/1130mm
Y - 35.4"/900mm
Z - 91.3"/2320mm
AccuracyTP20 (2.4 + 0.4L/100) µm
TP200 (2.3 + 0.4L/100) µm
SP25M (2.1 + 0.4L/100) µm
Scale Resolution0.00002"/0.0005mm
Optimum Temp. Range18 - 22°C
Operational Temp Range0 - 45°C
TableHoneycomb Aluminum and Granite
Table Load Capacity600 lbs./300 kg.
Max. Velocity Vector600mm/sec - CNC Units Only
Max. Acceleration Vector600mm/sec2 - CNC Units Only
Air Consumption50 I/min (1.8 cfm)
Required Air Pressure4 bar (60 psi)